visopsys-0.77.iso burned on a DVD, then booted in my machine (on the DVD) so real machine.
edit: pretty idem (even same lines) with visopsys-0.8_pre1.iso
[Edit I have the feeling that the problem is my card reader... In linux, it creates 4 disk drives, one for each slots (which have no cards in)
paul@arcturus:~$ lsusb
Bus 001 Device 002: ID 0bda:0111 Realtek Semiconductor Corp. RTS5111 Card Reader Controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 15d9:0a4f Trust International B.V. Optical Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Because it is part of the box, connected to the motherboard... I don't feel too much to disconnect it.
SCSI sense error key=0x02 asc=0x3a ascq=0x00 means NOT Ready, Media Not Found:
http://www.t10.org/lists/asc-alph.htm
]
The following lines repeat many times:
SCSI test unit ready failed
Error::KernelScsiDiskDriver.c:detectTarget(784):
SCSI sense error key=0x02 asc=0x3a ascq=0x00
Error::KernelScsiDiskDriver.c:usbScsiCommand (286):
USB MS Command error Status 01
Error::KernelScsiDriver.c:ScsiTestUnitReady (530):
Code: Select all
Trace:
kernelMain.c(79)
kernelInitialize.c(361)
kernelDisk.c:KernelDiskInitialize(361)??
kernelDisk.c:KernelDiskInitialize(2254)
kernelScsiDiskDriver.c:detectTarget(868)
KernelScsiDiskDriver.c.detectTarget(784)
KernelScsiDiskDriver.c:scsiTestUnitReady(530)
KernelScsiDiskDriver.c:usbScsiCommand(286)
MS Status 01
hardware info:
DVD writer drive with DVD on PATA
hard disk on Sata
mouse on a USB port
no other things on USB ports (no Disks on USB)
a multi-reader card for SDCards/MMC/RS etc.
(NVIDIA chipset)
I have tried to:
-disable Sata in BIOS (to disable my Hard disk)
-remove the Compatible mode in BIOS
-boot without the USB mouse
no change
Problem in kernelUsbDrriver.c must be here (near here... eh maybe not):
else if ((senseData.senseKey == SCSI_SENSE_NOTREADY) &&
(senseData.addlSenseCode == 0x04))
{
// The drive may be in the process of becoming ready
kernelMultitaskerWait(5);
continue;
}
Need to study that (senseData.addlSenseCode == 0x04
P.S. It would be cool to be able to pause the messages scrolling with the pause key