visopsys.org

Visopsys Forums
It is currently Sat Apr 21, 2018 6:14 pm

All times are UTC




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Announcing VisopsysN 0.75N1
PostPosted: Wed Dec 03, 2014 8:41 pm 
Offline

Joined: Sun Sep 01, 2013 7:58 pm
Posts: 29
I'm annoucing the first release of my own distribution of Visopsys, think of it as my personal playground, where I try adding features or fix issues I find. It's not at the point where I really wanted to make a first release, but well, I thought it was better to do this release than making it linger on my hard drive, anyway.

From VisopsysN.txt:
Quote:
VisopsysN is a distribution of the Visopsys operating system.
It is a release based on the official releases released at the official Visopsys web site, tracking them.
As such, this is not a fork of Visopsys.
VisopsysN adds eventual enhancements, features, bug fixes or programs that may or may not be added to official Visopsys releases.
Moreover, compatibility is not guaranteed between these releases and official ones.

This release is VisopsysN 0.75N1.
For more information, read the change log in the src/ directory.

Some things are not fully finished yet. new-install.sh in the utils/ directory
works but some checks for eventual errors have not implemented yet.
Using the old install scripts should work for CD and USB images but won't
for floppy images - as floppy images have their executables and libraries compressed.
Always use new-install.sh when generating floppy images.

Minimum requirements to run VisopsysN:
- IBM PC-compatible with at least an i586 processor (Pentium, K5, Cyrix, etc.)
- VGA compatible video card
- 16MB of RAM for graphics mode, 12MB of RAM for text mode

kernelInflate.c contains code from the zlib distribution (namely puff.c)


Changelog:
Quote:
--------------
Version 0.75N1 03/12/2014
--------------

Overview: First VisopsysN release. Mouse emulation, VGA video driver,
compressed binaries and much better CDROM booting are the highlights.

- Support for zlib-compressed executable and library files
- Support for mouse emulation
- Several mouse APIs are exported that weren't in the past
- Lists of basic installation files and full installation files totally revampled:
a basic install now is much more complete and functional.
Due to this, a functional system can also be installed from floppy disk.
This was made possible by the support for zlib-compressed binaries.
- VGA 640x480 16-color video driver added.
This makes possible to use the graphics mode on most PC-compatibles supported.
- Added supporting logic to the OS loader in order to make the
VGA video driver work. Now instead of bailing out to text mode, the OS loader
sets a VGA mode. Text-mode operation can always be forced by placing a file
named "nograph" in the root directory of the filesystem.
- Placing a file named "forcevga" in the filesystem's root directory will force
operation in VGA mode, ignoring any possibly supported VESA 2.0 linear
framebuffer mode.
- Timeout when doing polling operations on IDE drives has been increased tenfold,
and ATAPI reset is no longer done on ATAPI devices. Due to this, success rate
when booting from CDROM is much higher now. Almost all drives should now be able
to boot Visopsys from CDROM, fixing this annoying problem that was plaguing
the operating system.
- APIC support is left disabled by default, as it needs more testing.
Some systems and emulators (notably QEMU) had problems running the kernel
if APIC support was enabled.
- Totally new pre-installed image creation tool, in Bash shell language,
that relies completely on portable userland tools, such as MTools.
It makes it usable on many operating systems and does not require root
privileges. It is named new-install.sh and in the utils directory.
- Removed Linux-specific hack in copy-boot
- strlen(), strnlen() do not have a predetermined size limit anymore, as it is
common in most C library implementations.
- Applied RTC driver patch that fixes some issues on QEMU and VirtualBox
(patch here: viewtopic.php?f=3&t=252&start=12 )


Testing was made on several computers (dating from 1999 to 2006) - and yes, Visopsys in 16-colors! It looks quite pretty actually, better than I thought it would:
Image

If you want to try this out, either boot on a system without VESA 2.0 linear framebuffer support, or make a file named 'forcevga' in the root directory when using the floppy or USB image.

How to use mouse emulation (MouseEmulation.txt in the source):
Quote:
How to use mouse emulation
------------------
This document explains how to use the mouse emulation built in
VisopsysN. Mouse emulation is especially useful in situations where
you do not have access to a working mouse.

You can toggle mouse emulation by pressing Ctrl+Alt+Ins.
Once mouse emulation is enabled, Num-Lock must be turned off in order
to use the virtual mouse.

The virtual mouse is mapped to the keypad as follows:

8 -> Up
4 -> Left
6 -> Right
2 -> Down
/ -> Left mouse button
* -> Middle mouse button
- -> Right mouse button

When Num-Lock is enabled, the keypad behaves as it would usually when
it is enabled. Thus, it is important to remember to turn Num-Lock off.


Also, as I implemented support for compressed binaries and libraries, which are uncompressed on the fly when they are run, the floppy image is much feature-complete and can even be installed to disk.

Downloads:
Source code
Floppy disk image
CDROM ISO image
USB image

Enjoy, and hope this helps the development of this operating system.

EDIT: ISO image link fixed.

_________________
Visopsys@Unhaut - http://unhaut.fav.cc/visopsys


Last edited by nextvolume on Fri Dec 12, 2014 10:25 pm, edited 2 times in total.

Top
 Profile  
 
 Post subject: Re: Announcing VisopsysN 0.75N1
PostPosted: Thu Dec 04, 2014 12:02 am 
Offline
User avatar

Joined: Tue Nov 16, 2010 7:20 pm
Posts: 462
Hey nextvolume! That's really great, mate. Well done (and this way you don't have to wait for me to fix all the things that annoy you!).

When I do a new minor release (0.75 to 0.76 for example), I always keep the changes as a set of patches. Would those be useful to you when I do a release? Helpful for keeping them in sync?

I do have a home-grown compression library that's nearly complete. I did most of it a while ago, then had to put it down to work on hardware support. I was planning to release it with 0.8. It would be cool if you could eventually use that instead of zlib (assuming mine turns out alright).

The mouse emulation seems like a good idea. Heads-up that touchscreen support is coming as well. It's finished, maybe needs a bit more testing, and it'll be available as of 0.8

Again, well done. :clap:


Top
 Profile  
 
 Post subject: Re: Announcing VisopsysN 0.75N1
PostPosted: Thu Dec 04, 2014 1:55 pm 
Offline

Joined: Sun Sep 01, 2013 7:58 pm
Posts: 29
Yes, a set of release-to-release patches would be helpful to me to keep it in sync.
This compression library you speak of sounds interesting, I look forward to it.
And as usual, thank you :)

_________________
Visopsys@Unhaut - http://unhaut.fav.cc/visopsys


Top
 Profile  
 
 Post subject: Re: Announcing VisopsysN 0.75N1
PostPosted: Sun Dec 07, 2014 2:00 pm 
Offline
User avatar

Joined: Fri Jul 11, 2014 6:18 pm
Posts: 18
Hi nextvolume, the download link for the ISO it's wrong, link to the visopsys-0.75n1-src.zip instead of visopsys-0.75n1-iso.zip.

Corrected link:
Download CDROM ISO image

Now I going to download this version to see what's new. Thank's for your work.


Top
 Profile  
 
 Post subject: Re: Announcing VisopsysN 0.75N1
PostPosted: Sat Dec 27, 2014 7:37 pm 
Offline
User avatar

Joined: Tue Nov 16, 2010 7:20 pm
Posts: 462
Hi nextvolume,

The new version, 0.76, is released. As promised, here is a collection of individual patches to upgrade from 0.75.

They should be applied in numerical order, e.g. 01-xxxx_formatting.patch ... 62-xxxx_changelog.patch

Andy


Attachments:
visopsys-0.76-patchset.zip [318.85 KiB]
Downloaded 372 times
Top
 Profile  
 
 Post subject: Re: Announcing VisopsysN 0.75N1
PostPosted: Sat Dec 27, 2014 9:24 pm 
Offline

Joined: Sun Sep 01, 2013 7:58 pm
Posts: 29
Thank you. I have just applied the patchset.

_________________
Visopsys@Unhaut - http://unhaut.fav.cc/visopsys


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group