visopsys.org

Visopsys Forums
It is currently Sat Apr 21, 2018 5:59 pm

All times are UTC




Post new topic Reply to topic  [ 15 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Visopsys/PartLogic won't start
PostPosted: Fri Sep 02, 2011 7:27 pm 
Offline

Joined: Thu Sep 01, 2011 8:57 pm
Posts: 8
lately i have been trying to merge the partitions two on one hard drive into one so i downloaded Partition Logic and mounted it to a cd as per instructions. when the computer starts it goes to a blue screen that shows a loading bar for visopsys but when it gets to 100% loaded the computer just reboots, loads visopsys and reboots again and again. i figured it could be a problem with the cd so i downloaded, mounted and booted from a floppy to but got the same exact results.

could this be a problem with my computer? its pretty old but it has meets all the system reqs. not sure about the processor but it runs windows 98.

any help would be greatly appreciated. thanks
-Paul


Top
 Profile  
 
 Post subject: Re: Visopsys/PartLogic won't start
PostPosted: Fri Sep 02, 2011 7:40 pm 
Offline
User avatar

Joined: Tue Nov 16, 2010 7:20 pm
Posts: 462
Hi Paul, sorry you're having trouble with it.

It doesn't sound promising -- almost as if there's a problem with the processor being too old. If you have time, I can post links to a couple of 'debug' floppy disk images that will help me to understand the problem a bit better.

If it turns out to be processor compatibility, I may be able to give you a custom-built one that has code generated for older CPUs.

Let me know if you're game.

Andy


Top
 Profile  
 
 Post subject: Re: Visopsys/PartLogic won't start
PostPosted: Fri Sep 02, 2011 8:15 pm 
Offline

Joined: Thu Sep 01, 2011 8:57 pm
Posts: 8
Sure i have time


Top
 Profile  
 
 Post subject: Re: Visopsys/PartLogic won't start
PostPosted: Fri Sep 02, 2011 9:20 pm 
Offline
User avatar

Joined: Tue Nov 16, 2010 7:20 pm
Posts: 462
Great, thanks.

Here are 2 floppy images. I'm assuming floppies are better for you, than burning a bunch of CDs. Don't unzip both of these at the same time, in the same folder, as the unzipped file name is the same for each.

First one. This one just loads the kernel and stops:
http://visopsys.org/files/misc/visopsys ... -img-1.zip

Second one. This one loads the kernel and runs it, but the kernel immediately stops:
http://visopsys.org/files/misc/visopsys ... -img-2.zip

If they both work correctly, then they'll both appear to behave exactly the same way (loader progress bar just stops, but the system shouldn't reboot).

These both also print out some information about the hardware that doesn't appear under normal circumstances.

Thanks!
Andy


Top
 Profile  
 
 Post subject: Re: Visopsys/PartLogic won't start
PostPosted: Sat Sep 03, 2011 7:54 pm 
Offline

Joined: Thu Sep 01, 2011 8:57 pm
Posts: 8
okay. when i booted from each floppy they both did exactly the same thing as before although they did show the specs:

boot device > fd0, 2 heads, 80 cyls, 18sects, type: FAT12
Processor > Pentium ("AuthenticAMD") with MAX
Extended RAM > 31744K reported
CD ROM emulation check failed. CD booting might not be successful.
Floppy disks > 1 disk(s)
> 2 heads, 80 tracks, 18 sects,
Hard disks > 2 disk(s)
> 128 heads, 784 cyls, 63, sects, 512 bps 3093 MBytes
> 255 heads, 523 cyls, 63, sects, 512 bps 4112 MBytes
Loading visopsys

a picture: http://i.imgur.com/Cw6pE.jpg

i also noticed that the second test cycled the rebooted faster than the first.


Top
 Profile  
 
 Post subject: Re: Visopsys/PartLogic won't start
PostPosted: Sat Sep 03, 2011 8:06 pm 
Offline
User avatar

Joined: Tue Nov 16, 2010 7:20 pm
Posts: 462
MagnumX wrote:
i also noticed that the second test cycled the rebooted faster than the first.


Sorry if I misunderstand, but did either/both of these spontaneously reboot? The first one really shouldn't, at least!


Top
 Profile  
 
 Post subject: Re: Visopsys/PartLogic won't start
PostPosted: Sat Sep 03, 2011 8:20 pm 
Offline

Joined: Thu Sep 01, 2011 8:57 pm
Posts: 8
they both caused the computer to reboot as soon as the loading bar was full.
the first test left a rather long delay before starting again whereas the second test caused near instant reboot.


Top
 Profile  
 
 Post subject: Re: Visopsys/PartLogic won't start
PostPosted: Mon Sep 05, 2011 10:14 pm 
Offline
User avatar

Joined: Tue Nov 16, 2010 7:20 pm
Posts: 462
The fact that they both rebooted is very puzzling/tricky, but the long delay thing makes me think there are separate issues (if indeed there are any real issues in the first case). I built a new image for you that's 'normal' (i.e. no debugging stuff, no stops) but the code is generated for i386 processors. It's possible that the real issue is just the processor instruction set - though I'm only 50% confident. Care to give this one a try?

http://visopsys.org/files/misc/visopsys-2011-09-05-img.zip (floppy image again)


Top
 Profile  
 
 Post subject: Re: Visopsys/PartLogic won't start
PostPosted: Mon Sep 05, 2011 11:19 pm 
Offline

Joined: Thu Sep 01, 2011 8:57 pm
Posts: 8
Alright here's what displayed when i booted from that one:

loading bar

Disk IO error: Sense operation failed.
The boot device or media may require service.

Loading the Visopsys kernel failed. the kernel file 'visopsys' could not be read
The filesystem on the boot device may be corrupt: you should use a disk utility to check the integrity of the filesystem and the Visopsys files.

1 unrecoverable error(s) were recorded, and the boot process cannot continue. Any applicable error information is noted above. Please attempt to rectify these problems before retrying.
Press any key to reboot.


Top
 Profile  
 
 Post subject: Re: Visopsys/PartLogic won't start
PostPosted: Tue Sep 06, 2011 12:13 am 
Offline
User avatar

Joined: Tue Nov 16, 2010 7:20 pm
Posts: 462
Hmm, that actually does sound like a media error. Can you retry with another floppy, perhaps?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ]  Go to page 1, 2  Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group