Partion Logic CD will not boot

Discussion about Visopsys Partition Logic
Post Reply
bristolkid
Posts: 1
Joined: Thu Sep 01, 2011 12:07 am

Partion Logic CD will not boot

Post by bristolkid »

I am having trouble in getting the ISO CD to open. When I boot my PC with it I get the following error messages

Error:Kernal Process Kernal disk. c Kernal disk initialize (1891)
No Disks have been registered
Error:Kernal Process Kernal disk. c Kernal disk initialize (349)
Disk init9ialaztion failed
Error Kernal process Kernal main:(77)
Initialazatio failed.
I have tried two different downloads of latest issueand burnt three iso cds, they all give above message.
I have Windows 7 64 bit in a HP Pavilion running AMD 945 processor.
Does anybody have any idea what is wrong?

:(
admin
Site Admin
Posts: 6
Joined: Mon Sep 13, 2010 1:19 am

Re: Partion Logic CD will not boot

Post by admin »

Hi bristolkid, sorry you've been having trouble with it.

My first thought is to check in your BIOS settings, whether your hard disks are set to AHCI (native SATA) mode. If so, can you try setting them temporarily to IDE (legacy) mode? You can change them back when you're ready to boot back into Windows (though it shouldn't matter too much -- perhaps slightly slower).

Visopsys doesn't support fully-native SATA yet, though it's being actively worked on now.

Let us know if that helps at all.
monkeysee
Posts: 1
Joined: Tue Feb 14, 2012 4:46 am

Re: Partion Logic CD will not boot

Post by monkeysee »

I have a very similar problem. I have changed the SATA option in my BIOS settings to IDE as admin suggested but I get the same problem.

Any other suggestions?
User avatar
ap0r
Posts: 105
Joined: Tue Feb 14, 2012 12:40 am

Re: Partion Logic CD will not boot

Post by ap0r »

I hd that trouble and IDE emulation helped me... did you double check?
Image
Image
Post Reply